• It is ready to use product. Can be applied directly using Synthetic brush. Roller or scrapper as required. • Can be applied of various surfaces like concrete, stones, wood, metal, etc. • It gives a long lasting glossy, wet look finish on the surface. It is UV resistant, and will not discolour. • Pigment can be added to diluted solution for paint application on various surfaces. • It has very high abrasion resistance and good bonding with treated surface. • It forms a waterproof layer Protects the surface from stains and various other chemicals. • Quick drying. The treated surface is air cured. • Excellent weather ability. It can be used on exterior as well as interior surfaces. • It is water- based, very low VOC. It is eco-friendly. Non-flammable. Non-toxic. Low odor.

On application of diluted solution, it dries to form a protective film on the surface. The agents present in the product prevents “peeling off” effect and makes the application long lasting. Moreover the film is reinforced with nanometer sized particles, which improves abrasion resistance.

DIRECTION FOR USE All loose and damaged surfaces should be thoroughly rectified. ~ Surface should be free from dust, grease, coatings like curing compounds, etc. ~ It is advised to apply in two steps. Final coat (after primer coat dries)- Apply generously as required. ~ In case of floor, light foot traffic can be started after 4 hours of drying of final coat. ~ After application the surface can be buffed for improving the gloss.